PAST WEBINARSCFSEI has continued to offer at least six webinars for continuing education each year. The following excellent slate list of completed webinars to-date. 2024October 24, 2024 August 22, 2024 (Available On Demand) June 27, 2024 (Available On Demand) April 25, 2024 (Available on demand) February 22, 2024 (Available on demand) Webinar on Cold-Formed Steel Connection Applications Presented by Roger LaBoube, Ph.D., P.E. 2023December 7, 2023 (Available on demand)Webinar on Cold-Formed Steel Framing Design with Data-Driven Models Presented by Cristopher Moen, Ph.D., P.E.,F.SEI, RunToSolve LLC October 19, 2023 (Available on demand) Webinar on Built-Up Member Design Considerations Presented by Roger LaBoube, Ph.D., P.E., Cold-Formed Steel Engineers Institute August 31, 2023 (Available on demand) Webinar on the Wonderful World of Buckling Presented by Roger LaBoube, Ph.D., P.E., Cold-Formed Steel Engineers Institute 2022November 29, 2022 (Available on demand)Webinar on Updates to the AISI North American Specification and Framing Standards Presented by Jon-Paul Cardin, P.E., American Iron and Steel Institute September 22, 2022 (Available on demand) Webinar on Vibration Serviceability of Floors with Cold-Formed Steel Framing Presented by Brad Davis, Ph.D., S.E., P.E., University of Kentucky June 30, 2022 (Available on demand) Webinar on SE 2050 Commitment Program Committing to Net-Zero Embodied Carbon Presented by Charlotte A. Sauer, LEED AP BD+C, CannonDesign, Chris Jeseritz, S.E., P.E., LEED AP BD+C, PCS Structural Solutions, Mark D. Webster, P.E., LEED AP BD+C, Simpson Gumpertz & Heger February 24, 2022 (Available on demand) Webinar on Resilience Amidst Uncertain Times: Preparing the Cold-Formed Steel Industry Presented by Don Allen, P.E., LEED AP, SECB, Super Stud Building Products 2021December 16, 2021 (Available on demand)Webinar on Introducing AISI S250: Your starting place for determining thermal transmittance through cold-formed steel framing Presented by Jonathan Humble, FAIA, NCARB, LEED BD+C, American Iron and Steel Institute October 28, 2021 (Available on demand) Webinar on Overview of the Fundamental Behavior of Cold-Formed Steel Members and Connections Presented by Roger LaBoube, Ph.D., P.E. August 26, 2021 (Available on demand) Webinar on Innovative Cold-Formed Steel Floor System Presented by Matthew F. Fadden, Ph.D., P.E., Wiss, Janney, Elstner Associates and William N. Collins, Ph.D., P.E., University of Kansas June 24, 2021 (Available on demand) Webinar on Roles and Responsibilities for Success with Cold-Formed Steel Framing Presented by Jeffrey Klaiman, P.E., ADTEK Engineers, Inc. April 29, 2021 (Available on demand) Webinar on Practical Allyship 5 Actions Anyone Can Do to Promote Inclusion at Work Presented by Stephanie Slocum, P.E., Engineers Rising LLC February 4, 2021 (Available on demand) Webinar on Frequently Misunderstood Wind Load Topics for Cold-Formed Steel Structures Presented by Emily Guglielmo, P.E., S.E., F.SEI, Martin/Martin 2020December 17, 2020 (Available on demand)Webinar on Post-Installed Anchor Testing, Qualification, and Design Procedure Presented by Natasha Zamani, Ph.D., P.E., Hilti North America. October 29, 2020 (Available on demand) Webinar on Demystifying Cold-Formed Steel Torsion Analysis for Design Presented by Bob Glauz, RSG Software, Inc. August 13, 2020 (Available on demand) Webinar on on Mid-Rise Construction using Light Weight Steel Framing Presented by Raymond van Groll, M.Sc.(Eng), P.Eng. of Atkins + Van Groll Inc. June 11, 2020 (Available on demand) Webinar on Cold-Formed Steel Attachment to Concrete in Seismic Zones Presented by Christopher Gill, Hilti, Inc. April 9, 2020 (Available on demand) Design Considerations for Cold-Formed Steel Light Frame Diaphragms Presented by Reynaud Serrette, Santa Clara University. February 27, 2020 (Available on demand) Cold-Formed Steel Classroom: Connection Design 101 Presented by Roger LaBoube, Ph.D., P.E., Wei-Wen Yu Center for Cold-Formed Steel Structures. 2019December 19, 2019 Steel Deck on Cold-Formed Steel Framing Webinar Presented by Thomas Sputo, Ph.D., P.E., S.E., Steel Deck Institute. October 10, 2019 (Available on demand) Fire and Cold-Formed Steel Design Webinar Presented by Kyle Flondor, USG Corporation August 22, 2019 (Available on demand) Webinar on Innovative Options with Cold-Formed Steel Floor Systems Presented by Don Allen, P.E., Super Stud Building Products, Inc. June 27, 2019 (Available on demand) Webinar on Cold-Formed Steel Classroom: Design Topics Not in a Design Standard Presented by Roger LaBoube, Ph.D., P.E., Wei-Wen Yu Center for Cold-Formed Steel Structures April 18, 2019 (Available on demand) Webinar on Co-ordinating Cold-Formed Steel Framing with Metal Buildings Presented by Jeff Klaiman, P.E., ADTEK Engineers, Inc. February 28, 2019 (Available on demand) The New AISI Shear Wall Design Guide - AISI-D113-19 Webinar Presented by Rob Madsen, P.E., Devco Engineering 2018December 13, 2018 (Available on demand) Cold-Formed Steel Classroom Webinar - Impact of the 2018 IBC Presented by Roger LaBoube, Ph.D., P.E., Wei-Wen Yu Center for Cold-Formed Steel Structures October 11, 2018 Cold-Formed Steel Framing Webinar Design with the AISI Direct Strength Method Presented by Cristopher D. Moen, Ph.D., P.E., F.SEI, NBM Technologies, Inc. August 23, 2018 Construction-Grade Thumbtacks Webinar Presented by Derek Putz, P.E., raSmith, Inc. June 28, 2018 (Available on demand) Cold-Formed Steel Classroom: The Fundamental Behavior of Cold-Formed Steel Members Steel Webinar Presented by Roger LaBoube, Ph.D., P.E., Wei-Wen Yu Center for Cold-Formed Steel Structures. April 26, 2018 ASTC and Cold-Formed Steel Webinar Presented by Dr. Christoph Hoeller, National Research Council Canada. February 22, 2018 Change Orders and Cold-Formed Steel Webinar Presented by Don Allen, P.E., Super Stud Building Products, Inc. 2017December 7, 2017 Designing Curved Facades with CFS Webinar Presented by T. Patrick Earney, P.E., S.E. McClure Engineering October 26, 2017 The Structural Aspect of Interior Non-Structural Cold-Formed Steel Framing Webinar Presented by Randy Kuss, ClarkDietrich Engineering Services, LLC CDES). August 24, 2017 Blast Design of Cold-Formed Steel Components, Walls and Roof Systems Webinar Presented by Cliff Jones,Protection Engineering Consultants July 20, 2017 Being the Engineer of Record on a Metal Building Project Webinar Sponsored by AISI and MBMA Presented by W. Lee Shoemaker, P.E., Ph.D., MBMA. June 8, 2017 Essential Concepts for the Meticulous Navigation of CFS Regulations (IBC and ASTM Code Compliance, LEED, Buy America(N)) Webinar Presented by Adam Shoemaker, CDT, LEET AP - BD&C ClarkDietrich Building System. April 27, 2017 Firestopping and Fastening of Exterior and Interior Walls Webinar Presented by Matthew Vickrey, Field Engineer, Hilti Inc. February 23, 2017 (Available on demand) The Devil is in the Details - Learning from Mid‐Rise Successes and Failures Webinar Presented by Don Allen, P.E. Director of Engineering 2016December 13, 2016 Significant Changes to AISI S100, Cold-Formed Steel Design Specification Webinar Sponsored by AISI and MBMA Presented by Richard B. Haws, P.E., Nucor Buildings Group and Vincent E. Sagan, P.E., MBMA. December 8, 2016 Back to Basics: Structural vs. Nonstructural Member Design Webinar Presented by Roger LaBoube, Ph.D., P.E., Wei-Wen Yu Center for Cold-Formed Steel Structures October 13, 2016 Introduction to AISI S400 North American Standard for Seismic Design of Cold‐Formed Steel Structural Systems Presented by Rob Madsen, P.E., Devco Engineering, Inc. September 21, 2016 Metal Building Systems and Life Cycle Assessment Webinar Sponsored by AISI and MBMA Presented by Jamie Meil and Matthew Bowick, Athena Sustainable Materials Institute August 11, 2016 Back to Basics: Cold-Formed Steel Framing Design Guide - AISI D110-16 Presented by Roger LaBoube, Ph.D., P.E., Wei-Wen Yu Center for Cold-Formed Steel Structures June 2, 2016 BIM and Cold-Formed Steel Presented by Ricky Rodriguez, BlueScope Buildings North America April 21, 2016 Cold-Formed Steel Trusses and Blast Loads Presented by Mark Weaver February 18, 2016 Seismic Engineering of Cold-Formed Steel Framed Buildings and the CFS-NEES Effort Presented by Benjamin W. Schafer, Ph.D., P.E. 2015December 3, 2015 Sound Transmission in Cold-Formed Steel Constructions Webinar Presented by Christoph Hoeller, Ph.D. October 22, 2015 Cold-Formed Steel Lateral Systems Webinar Presented by Jeff Ellis, P.E.S.E. August 27, 2015 PAF Developments in Cold-Formed Steel Webinar Presented by William Gould, P.E. June 25, 2015 Back to Basics: Framing Connection Design Webinar Presented by Dr. Roger A. LaBoube April 9, 2015 Mid-Rise Cold-Formed Steel Construction and Design - A Case Study Webinar Presented by Pat Ford February 12, 2015 Back to Basics: A Look at Changes to the North American CFS Specification and CFS Standards Webinar Presented by Dr. Roger A. LaBoube. 2014December 4, 2014 AISI Brick Veneer Cold-Formed Steel Design Guide Webinar Presented by Sutton Stephens, Ph.D., P.E. October 23, 2014 Back to Basics: A Review of AISI S100 and S211 Brace Design Provisions & Torsion Considerations Presented by Roger LaBoube, Ph.D., P.E. September 19, 2014 CFS-NEES: Putting CFS Framing to the Test Presented by Rob Matsen, P.E. August 14, 2014 Back to Basics: A Review of AISI S100, S211 and S212 Built-up Member Design Provisions Presented by Roger LaBoube, Ph.D., P.E. June 12, 2014 Cold-Formed Steel Strap Braced Walls Webinar Presented by Dr. Colin Roger. April 24, 2014 Composite Floor Systems Using Cold-Formed Steel Webinar Presented by Reinhold M. Schuster, Ph.D, P.Eng. February 27, 2014 Blast Design of Cold-Formed Steel Framing Webinar Presented by Nabil A. Rahman, Ph.D., P.E. 2013December 5, 2013 Specifying Cold-Formed Steel Webinar Finding and avoiding pitfalls in structural general notes and architectural specifications Presented by Don Allen, P.E. October 3, 2013 Designing for Efficiency and Estimating with Accuracy Webinar Presented by Mitch Hughes. August 1, 2013 Back-to-Basics – A Review of AISI S100 Compression Member Design Provisions Presented by Dr. Roger A. LaBoube. June 6, 2013 Cold-Formed Steel Curtain Wall Design Presented by Sutton Stephens, P.E., S.E., Ph.D. February 7, 2013 Strengthening the Weakest Link - Designing Reliable Connections for Cold-Formed Steel Framing Presented by John Lyons, P.E., S.E. 2012December 6, 2012 Cold-Formed Steel Framed Lateral Design Using AISI S213 Webinar Presented by Jeff Ellis, P.E., S.E. October 4, 2012 Bracing and Bridging of Cold-Formed Steel Presented by Jennifer Zabik, P.E., S.E. August 30, 2012 Evolving Energy Codes and Standards - Challenges and Opportunities for the Industry Presented by Jay Crandell, P.E. June 14, 2012 Back to Basics: A Review of AISI S100 and S210 Flexural Member Design Provisions Presented by Dr. Roger A. LaBoube. April 05, 2012 Roof Framing Challenges with Cold-Formed Steel Presented by Bill Babich, P.E. February 22, 2012 Lateral Drift Design in Cold-Formed Steel Wall Systems Presented by Thomas A. Castle, S.E. 2011December 1, 2011 Building Information Modeling (BIM) for the CFS Industry Presented by Erich Bretz, P.E., and Dan McCloskey, P.E. August 25, 2011 Cold-Formed Steel Submittal: Expectations And Performance of Structural And Specialty Engineers Presented by Steve Walker, P.E. June 9, 2011 Fire Resistive Noise Control Solutions For Cold-Formed Steel Presented by Elzo F. Gernhart. March 23, 2011 Cold-Formed Steel Design & Detailing To Dodge Distortional Buckling Presented by Dr. Cris Moen. February 17, 2011 Cold-Formed Steel Field Observations Presented by Mitch Hughes. 2010December 1, 2010 Cold-Formed Steel Connection Design 2007 AISI & 2007 IBC Presented by J.R. Ubejd Mujagic, Ph.D.,P.E., S.E. August 25, 2010 Major Changes to the AISI S100 Design Standard, included in the 2009 International Building Code Presented by Dr. Roger A. LaBoube. June 23, 2010 Beginners Guide to the Direct Strength Method for Cold-Formed Steel Design Presented by Dr. Ben Schafer. 2009November 11, 2009 Shear Wall Design Guide Presented by Jeff Ellis, P.E., S.E. |
Free Publications
Latest News
Upcoming Events
Thu Dec 12, 2024Webinar on Progressive Collapse Design in Cold-Formed Steel Structures Category: Webinar |
View Full Calendar
Announcements
Press Release! • June 17, 2024
CFSEI to Host Webinar on Design Aids for Cold-Formed Steel CFSEI Tech Notes on June 27
Press Release! • April 22, 2024
CFSEI To Host Webinar on Current Topics in Cold-Formed Steel Framing on April 25, 2024
Press Release! • April 5, 2024
CFSEI Publishes Tech Note F104-24 on the Design of Cold-Formed Steel (CFS) Bearing Stiffeners