| NOTE:
The listed Research Notes are available for FREE DOWNLOAD
in the Members Only Section. These publication are also
available for purchase in the online
store. |
| |
| Corrosion
& Durability
|
 Corrosion
Protection For Cold-Formed Steel Framing in Coastal
Areas |
| Tech Note
-D001-07: Durability of Cold-Formed Steel Framing Members |
| |
| General
Topics
|
|
Tech Note- G000-08 Cold-Formed Steel Design Software |
|
Tech Note- G100-07: Using Chapter F of the North American
Specification for the Design of Cold-Formed Steel Structural
Members |
|
Tech Note -G800-07: ASTM Standards for Cold-Formed Steel
(G800-07) |
|
Tech Note -360: Acoustic Insulation and Sound Transmission
in Cold-Formed Steel Construction |
|
TechNote-420: Fire-Rated Assemblies for Cold-Formed
Steel Construction |
TechNote-1010b: Inspection Checklist for Structural
Cold-Formed Steel Framing: Field Guide · shirt-
pocket size, 2002 edition |
TechNote-1010c: Inspection Checklist for Structural
Cold-Formed Steel Framing · 8-1/5 x 11 format,
2002 edition |
|
TechNote-140: Corrosion Protection for Cold-Formed Steel
Framing in Coastal Areas |
|
Field Installation Guide for Cold-Formed Steel Roof
Trusses |
| |
| Structural
Elements and Systems |
|
TechNote - 542: Introduction to Curtain Wall Design
Using Cold-Formed Steel |
| TechNote
- 552: Cold-Formed Steel Joists |
| |
| Floor/Roof
Trusses |
|
TechNote - 551d: Design Guide: Construction Bracing
of Cold-Formed Steel Trusses |
|
TechNote - 551e:Design Guide: Permanent Bracing of Cold-Formed
Steel Trusses |
|
TechNote - 551f: Specifying Pre-Engineered Cold-Formed
Steel Floor and Roof Trusses |
| |
| Shear
Walls & Diaphragms |
|
TechNote - 550: Design Values for Vertical and Horizontal
Lateral Load Systems |
|
TechNote - 556a-4: Shear Transfer at Top Plate: Drag
Strut Design |
|
TechNote - 556a-6: Vertical Lateral Force Resisting
System: Boundary Elements |
|
TechNote - 558b-1: Lateral Load Resisting Elements:
Diaphragm Design Values |
|
TechNote - 559: Design Considerations for Flexural and
Lateral-Torsional Bracing |
| |
| Fasteners/Connections |
|
TechNote - 560b-1: Welding Cold-Formed Steel |
|
TechNote - 560b-5: Fastener Corrosion |
|
TechNote - 560c: Clinch (Integral) Fastening of Cold-Formed
Steel |
|
TechNote - 561b: Pneumatically Driven Pins for Wood-Based
Panel Attachment |
|
TechNote - 561c: Diaphragm Design With Pneumatically
Driven Pins |
|
TechNote - 562: Powder Actuated Fasteners in Cold-Formed
Steel Construction |
|
TechNote - 544: Design of By-Pass Slip Connectors in
Cold-Formed Steel Construction |
TechNote - 565d: Screws For Attachment of Steel-To-Wood
and Wood-Steel  |
|
TechNote - 565c: Screw Fastener Selection for Light
Gauge Steel Framing |
| |
| |
| |
